HueForge - Benimaru Shinmon - Fire Force

DescriptionHey, this is one of my first uploads, so please be kind to me ;D. Here's a manga panel of Benimaru Shinon from Fire Force. The most important information is described below; if anything is missing, feel free to let me know. Enjoy! The model can be scaled up, but only along the X and Y axes; the height must not be changed. Please set the mode to Arachne in the Wall Generator for the best results. Makerworld didn't allow me to upload the print profile due to the longer slicing time. The preview image was printed with Arachne Mode active. Slicing takes relatively long the first time, but don't worry, the program doesn't freeze; the long slicing time is normal ;D Print Details:Dimensions: 150mmx148mmPrint Settings: 100% infill |layer height of 0.08mm | base layer of 0.16mm | Arachne mode has to be active Filaments Used:PLA Elegoo Basic Black Transmission Distance: 0.5PLA Eryone Agate Grey Transmission Distance: 1.6PLA Eryone Jade-White Transmission Distance: 9Thi