HueForge BMW E30 M3

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 225x225mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.6mm and the Actual Depth is 1.6mmFilaments Used:PETG BambuLab Basic White Transmission Distance: 4.8PETG BambuLab Basic Gray Transmission Distance: 0.5PETG GEEETECH BLACK Transmission Distance: 0.5This print uses 3 unique filamentsSwap Instructions:Start with WhiteAt layer #8 (0.72mm) swap to GrayAt layer #12 (1.04mm) swap to BLACK for the rest. Warnings about floating areas can be ignored.If you want to scale it down or up only change in x and y. Keep the z size the same Boost Me