Hueforge bob esponja

Project: Bob esponja.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 3mm and the Actual Depth is 2.1mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Yellow Transmission Distance: 6 PETG JAYO White Transmission Distance: 6 This print uses 4 unique filaments !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #9 (0.8mm) swap to Yellow At layer #12 (1.04mm) swap to White for the rest.