Hueforge - Bojack "It Gets Better"

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132.97x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used:#080a0d PLA PolyLite Black Transmission Distance: 0.3#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Hot PinkAt layer #13 (1.12mm) swap to Pumpkin OrangeAt layer #20 (1.68mm) swap to Hot PinkAt layer #26 (2.16mm) swap to Sunflower Yellow for the rest.