Hueforge Butterfly

Hueforge Butterfly Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Bambu lab Black PLA Bambu lab Dark Red PLA PolyTerra Sapphire Blue PLA Flashforge White This print uses 4 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Dark Red At layer #14 (1.2mm) swap to Sapphire Blue At layer #20 (1.68mm) swap to White for the rest.