HUEFORGE charizard pokemon

You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PETG GEETECH Gray Transmission Distance: 3 PLA BambuLab Basic Yellow Transmission Distance: 6 PETG JAYO White Transmission Distance: 6 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Green At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #16 (1.36mm) swap to Gray At layer #18 (1.52mm) swap to Yellow At layer #20 (1.68mm) swap to Green At layer #21 (1.76mm) swap to White for the rest. Commencer par le noir A la couche #6 (0.56mm) changer pour le vert A la couche #9 (0.8mm) changer pour le rouge A la couche #13 (1.12mm) changer pour le orange A la couche #16 (1.36mm) changer pour le gris A la couche #18 (1.52mm) changer