HueForge City

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.09x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PETG GEEETECH BLACK Transmission Distance: 0.5PETG GEEETECH BLUE Transmission Distance: 5.3PETG Sunlu Red Transmission Distance: 11PETG GEEETECH White Transmission Distance: 8.9This print uses 4 unique filaments Swap Instructions:Start with BLACKAt layer #8 (0.72mm) swap to BLUEAt layer #10 (0.88mm) swap to Red Border Only Colors from here until the end.At layer #19 (1.6mm) swap to WhiteAt layer #29 (2.4mm) swap to BLACK for the rest. You can scale the model down, but don't scale down in the z-direction. The warning about floating areas can be ignored. Boost Me