HueForge Commander Cards

A Commander Card insert which fits perfectly into the front slot of the commander deck box I created. This is an optional insert, but makes the deck box stand out from the other bland deck boxes by integrating some hue forge prints. Here are the print settings for the color changes For Groot Card (Phylath, Word Sculptor)Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 66x91.32mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.5mm and the Actual Depth is 1.5mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #8 (0.72mm) swap to Blue Gray At layer #9 (0.8mm) swap to Jade White for the rest. For Atraxa CardPrint at 100%