HueForge - Dayseeker

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x47.07mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mmFilaments Used: #44d62c PLA Kexcelled Fluorescent Green Transmission Distance: 4.6 #f2306e PLA PolyLite Magenta Transmission Distance: 1 This print uses 2 unique filaments Swap Instructions: Start with Fluorescent Green At layer #9 (0.8mm) swap to Magenta for the rest.