Hueforge - Deadpool Face - Wall Mount Stand

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 140x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6.5 PLA BambuLab Basic White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #18 (1.52mm) swap to White for the rest. ---------------------------------------------------------------------------------------------------------Here you find the frames for the hueforge200 × 140 mm & 140 mm × 200 mm || All-in-One-Framehttps://makerworld.com/de/models/897636#profileId-856000 200 x 200 mm || All-in-One-Framehttps://makerworld.com/de/models/766355#profileId-701658----------------------