HueForge - Demon 01

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA Generic Transmission Distance: 0.3PLA Generic Red Transmission Distance: 5PLA Generic Yellow Transmission Distance: 5PLA Generic Grey Transmission Distance: 5PLA Generic White Transmission Distance: 5 !!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!! Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to RedAt layer #17 (1.44mm) swap to YellowAt layer #19 (1.6mm) swap to GreyAt layer #23 (1.92mm) swap to White for the rest.