Hueforge - Dog Snow

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.5mm and the Actual Depth is 1.9mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Ivory White Transmission Distance: 4This print uses 2 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Ivory White for the rest.