Hueforge - Dragon with Cherry Blossom

First crack at Hueforge, Dragon with Cherry Blossom, printed better than expected! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x150mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 8 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to Pink At layer #18 (1.52mm) swap to White for the rest.