Hueforge - Dream Catcher

Hueforge generated file printed on Bambu Lab X1C. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.Filaments Used:PLA ENVLAS Black Transmission Distance: 0.3PLA ENVLAS Yellow Transmission Distance: 5PLA ENVLAS Yellow Transmission Distance: 5PLA ENVLAS Red Transmission Distance: 1.5PLA ENVLAS Yellow Transmission Distance: 5PLA ENVLAS Grey Transmission Distance: 2PLA ENVLAS BL/GRN/RED Transmission Distance: 1.5PLA ENVLAS Yellow Transmission Distance: 5PLA ENVLAS Marble Transmission Distance: 5Swap Instructions:Black until layer #5 at 0.48mmYellow until layer #6 at 0.56mmYellow until layer #7 at 0.64mmRed until layer #8 at 0.72mmYellow until layer #9 at 0.8mmGrey until layer #11 at 0.96mmBL/GRN/RED(tricolor) until layer #14 at 1.2mmYellow until layer #16 at 1.36mmMarble for the rest.