Hueforge - Dune (Arrakis)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Yellow Transmission Distance: 6 Swap Instructions: Start with Charcoal At layer #3 (0.32mm) swap to Red At layer #8 (0.72mm) swap to Orange At layer #15 (1.28mm) swap to Yellow for the rest.