HueForge E.T. El Extraterrestre

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 1.4mm Filaments Used: PLA Smart Recycled Black PLA smartfil marron PLA Smart Recycled White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to marron At layer #10 (0.88mm) swap to White for the rest.