Hueforge Elefant

by DaisyPrint

58 Downloads

52 Likes

34 Makes

Download Model

Project: elefant.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.3mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Burly Wood Transmission Distance: 2.5 PLA+ Sunlu White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Bu