Hueforge Elephant

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 128.67x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start wit