Hueforge Fortnite

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x110.46mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA Pink Transmission Distance: 5 PLA Gray Transmission Distance: 3 PLA Light Blue Transmission Distance: 5 PLA Blue Transmission Distance: 5 PLA Purple Transmission Distance: 5 PLA White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Pink At layer #12 (1.04mm) swap to Gray At layer #13 (1.12mm) swap to Light Blue At layer #15 (1.28mm) swap to Blue At layer #18 (1.52mm) swap to Purple At layer #21 (1.76mm) swap to White for the rest.