Hueforge Goku

Project: Goku.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.43x200.15mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Sunlu Orange Transmission Distance: 5 PLA Sunlu Red Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Orange At layer #18 (1.52mm) swap to Red for the rest.