Hueforge GOLF GTI

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Smart_Recycled Azul_Oscuro Transmission Distance: 0.5 PLA 3DFils_850 Azul_Electrico Transmission Distance: 1.1 PLA Smart_Recycled Azul Transmission Distance: 2.2This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Jade White At layer #15 (1.28mm) swap to Azul_Oscuro At layer #23 (1.92mm) swap to Azul_Electrico At layer #25 (2.08mm) swap to Azul for the rest. Imprima al 100% de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mm El modelo tiene un tamaño de 200x200 mm. Filamentos utilizados: PLA BambuLab Basic Negro Distancia de transmisión: 0,6 PLA BambuLab Basic Jade Blanco Distancia de transmisión: 5 PLA Smart_Recycled Azul_Oscuro Distancia de transmisión: 0.5 PLA 3DFils_850 Azul_Electrico