MakerWorld
Hueforge & Lithophane
Zum Modell
hueforge goupix Vulpix
11
Downloads
12
Likes
6
Makes
Project: goupix v1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 162.32x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #22 (1.84mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
