Hueforge Heart with Arrow

Benötigt werden nur 4 Farben : Weis, Rot; Blau und Schwaz.In meinem Druckprofil sind die Pausen hinterlegt wo ihr euer filament eingeben müsst. Wichtig ist die Einstellung : Project: Herz.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 4.6mm and the Actual Depth is 1.5mmFilaments Used: PLA Kingroon White Transmission Distance: 4.7 PLA Kingroon Red Transmission Distance: 4.2 PLA Kingroon Blue Transmission Distance: 0.9 PLA Kingroon Black Transmission Distance: 0.2This print uses 4 unique filamentsSwap Instructions: Start with White At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Blue At layer #18 (1.52mm) swap to Black for the rest.