MakerWorld
2D Art
Ver Modelo
Hueforge Horse
56
Descargas
49
Likes
7
Makes
A black white and brown hueforge of a horseuse the following for printing Here are the filament color details: Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mmThe Model is 180x100.78mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.6mm and the Actual Depth is 1.7mmFilaments Used: PLA F4P schwarz Transmission Distance: 0.1 PLA Sunlu Matte Red Transmission Distance: 3 PLA Extrudr Grau Metalic Transmission Distance: 1.3 PLA Generic Braun Nicep Transmission Distance: 7.5 PLA BambuLab Basic White Transmission Distance: 7This print uses 5 unique filamentsSwap Instructions: Start with schwarz At layer #10 (0.7mm) swap to Red At layer #11 (0.76mm) swap to Grau Metalic At layer #13 (0.88mm) swap to Braun Nicep At layer #15 (1mm) swap to White for the rest.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!