Hueforge horses

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x204.08mm in size Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA Smart_Recycled Azul Transmission Distance: 2.2 PLA Smart_Recycled Amarillo Transmission Distance: 9.3 PLA Smart_Recycled Blanco Transmission Distance: 6.4 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Dark Brown At layer #14 (1.2mm) swap to Azul At layer #16 (1.36mm) swap to Amarillo At layer #19 (1.6mm) swap to Blanco for the rest. Imprima al 100% de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mm El modelo tiene un tamaño de 200x204,08 mm. Filamentos utilizados: PLA BambuLab Basic Negro Distancia de transmisión: 0,6 PLA BambuLab Marrón oscuro mate Distancia de transmisión: 2 PLA Smart_Recycled Azul Distancia de transmisión: 2.2 PLA Smart_Recycled Amarillo Distancia de trans