Hueforge Imperial Logo

Hueforge Imperial Logo---------------------------------------------------------------------------------------------------------Become a Patreon Free Member and vote for upcoming models …www.patreon.com/thereallagnor69--------------------------------------------------------------------------------------------------------- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Dark Blue At layer #9 (0.8mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest. ---------------------------------------