hueforge joker 2.0

Project: joker morados.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 187.5x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA smartfil morado Transmission Distance: 1.6 PLA smatfil amarillo Transmission Distance: 5.8 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to morado At layer #10 (0.88mm) swap to amarillo At layer #15 (1.28mm) swap to White for the rest.