Hueforge Killer Cigarretes

Project: Cigarretes Kill.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 117.28x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #20 (1.68mm) swap to White for the rest.