HueForge - Levi Ackerman

Project: HueForge - Levi AckermanPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 131.08x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Black Transmission Distance: 0.6 PLA BambuLab Matte Pine Green Transmission Distance: 1 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #4 (0.79mm) swap to Pine GreenBorder Only Colors from here until the end. At layer #6 (1.06mm) swap to Ash GrayThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #12 (1.33mm) swap to Ivory White for the rest.