HueForge Lion

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Sunlu Matte Grey Transmission Distance: 0.5 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA PolyTerra Cotton White Transmission Distance: 2.5 Swap Instructions: Start with Charcoal Black At layer #16 (1.36mm) swap to Matte Grey At layer #19 (1.6mm) swap to Ash Gray At layer #23 (1.92mm) swap to Cotton White for the rest.