Hueforge Loaf cat

Project: Loaf cat Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x161.17mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Orange Transmission Distance: 7.5This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Orange for the rest.