Hueforge Lobito

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x225mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA Overture White Transmission Distance: 4.4This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #14