hueforge loup

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.33mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.3mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 9 unique filamentsSwap Instructions: Start with Red At layer #8 (0.72mm) swap to BambuLab Green At layer #9 (0.8mm) swap to Black At layer #11 (0.96mm) swap to Gray At layer #13 (1.12mm) swap to Brown At layer #14 (1.2mm) swap to Orange At layer #15 (1.28mm) swap to Jade White At