hueforge Michael Jordan

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x206.59mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA smatfil rojo Transmission Distance: 2.3 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Jade White At layer #13 (1.12mm) swap to Black At layer #14 (1.2mm) swap to rojo At layer #20 (1.68mm) swap to Yellow At layer #22 (1.84mm) swap to Jade White for the rest. AIR JORDAN