Hueforge Monster Dragon

Hueforge Monster Dragon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6 Swap Instructions: Start with Ash Gray At layer #3 (0.32mm) swap to Black At layer #6 (0.56mm) swap to Red At layer #8 (0.72mm) swap to Orange At layer #9 (0.8mm) swap to Yellow At layer #10 (0.88mm) swap to Gray At layer #12 (1.04mm) swap to White for the rest.