HueForge Naruto 5 Colors

Une Buse de 0.2 es recommandé mais une de 0.4 fonctionne parfaitement Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 3.68mm and the Actual Thickness is 3.68mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 This print uses 5 unique filaments Instructions de changements: Commencer par Charcoal At layer #7 (0.64mm) swap to Blue Gray At layer #12 (1.04mm) swap to Ivory White At layer #36 (2.96mm) swap to Blue At layer #39 (3.2mm) swap to Marine Blue At layer #42 (3.44mm) swap to Ivory White pour le reste.