HueForge Ninja 4 colors

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 108.73x150mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 3.52mm and the Actual Thickness is 2.16mm Filaments Used: #000000 PLA #SMARTFILM black Transmission Distance: 0.8 #c12d28 PLA #SUNLU+ red Transmission Distance: 8.7 #8f9198 PLA #JAYO+ dark grey Transmission Distance: 2.2 #ffffff PLA #SUNLU+ white Transmission Distance: 11 This print uses 4 unique filaments Swap Instructions: Start with NEGRO At layer #5 (0.56mm) swap to red At layer #13 (1.2mm) swap to dark grey At layer #16 (1.44mm) swap to white for the rest.