HueForge Pikachu Card (Card/Frame Format)

Une Buse de 0.2 es recommandé mais une de 0.4 fonctionne parfaitement Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 3 unique filaments Instructions de changements: Commencer par Charcoal At layer #15 (1.28mm) swap to Yellow At layer #26 (2.16mm) swap to Ivory White pour le reste.