Hueforge Pikachu Lightning ( 3 Colour )

An angry Little Pikachu Prints using three colours and the colours i used were Black orange and yellow Project: Picachu Lightning.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.43x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Sunlu Orange Transmission Distance: 5 PLA Sunlu Yellow Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Orange At layer #15 (1.28mm) swap to Yellow for the rest.