Hueforge Pikachu

Project: Pikachu.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 317.46x359.79mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.16mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #7465e7 PLA Hatchbox Purple Transmission Distance: 2.6 #dd0071 IMAGE #dd0071 Transmission Distance: 1 #17cbee IMAGE #17cbee Transmission Distance: 1 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 6 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!!!!! It appears you have Image Colors as Filaments. It will not be possible to print this. !!!!!Swap Instructions: Start with PolyLite Black At layer #10 (0.88mm) swap to Hatchbox Purple At layer #12 (1.04mm) swap to #dd0071 At layer #15 (1.28mm) swap to #17cbee A