MakerWorld
Hueforge & Lithophane
Go to Model
Hueforge pikachu v2
8
Downloads
17
Likes
1
Makes
Project: pikachu v2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #18 (1.52mm) swap to Pumpkin Orange At layer #21 (1.76mm) swap to Yellow for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
