Hueforge pingüino

Project: Pingu.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x247.99mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 3mm and the Actual Depth is 2.3mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5 PETG JAYO White Transmission Distance: 6 This print uses 3 unique filaments !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Orange At layer #14 (1.2mm) swap to White for the rest.