Hueforge Puzzle Rammstein

❤️🔥Discover the very first Hueforge Puzzle❤️🔥🧰 It consists of a 240x187x32 mm Hueforge, paired with a negative STL puzzle file. When sliced, this will cut the Hueforge into puzzle pieces. ‼️ This is still in the testing phase. For this prototype, I've allowed 0.15 mm of play. This seems the most reasonable for assembly. Too much play, and the Hueforge won't have its optimal performance. Less play risks fusing all the pieces together.🛠️ My advice: have optimal Z-hop and retraction settings specific to your machine, along with your filament settings, and a sloping Z-hop. This reduces the risk of stringing.Here are my settings, in case it helps anyone 🤘 🧰 Hueforge Instructions:Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm.Start with Black.At layer #10 (0.88mm) swap to Blue Gray.At layer #15 (1.28mm) swap to Gray.At layer #22 (1.84mm) swap to White for the rest. ‼️ Changing the STL size will alter the gap between the parts 😉 ‼️🛠️ The Hueforge