HueForge R2D2 multicolor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA PolyTerra Army Blue Transmission Distance: 0.3PLA PolyLite Azure Blue Transmission Distance: 3PLA BambuLab Matte Mandarin Orange Transmission Distance: 3PLA PolyLite Grey Transmission Distance: 1PLA PolyLite White Transmission Distance: 5 Swap Instructions:Start with BlackAt layer #20 (1.68mm) swap to Charcoal BlackAt layer #23 (1.92mm) swap to Army BlueAt layer #24 (2mm) swap to Azure BlueAt layer #28 (2.32mm) swap to Mandarin OrangeAt layer #48 (3.92mm) swap to GreyAt layer #64 (5.2mm) swap to White for the rest. In the example photo I used Polymaker Metallic Blue PLA instead of Army Blue and I used Bambu Basic Orange PLA instead of the BambuLab Matte Mandarin Orange. I made R2 look a little rough around the edg