hueforge Rafa Nadal 2

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mmThe Model is 149.99x177.92mm in sizeYou may print at higher layer heights below the Min Depth of 0.5mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA smatfil White Transmission Distance: 6This print uses 2 unique filamentsSwap Instructions: Start with Charcoal Black At layer #7 (0.58mm) swap to White for the rest.