Hueforge Rem (Re:Zero) honeycomb mode

Project: Rem.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 270.9x270.9mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA Anycubic Black Transmission Distance: 0.8 #2a367e PLA SM blue Transmission Distance: 1.2 #34cee6 PLA Elego Cian Transmission Distance: 4 #ffffff PLA Anycubic White Transmission Distance: 7 This print uses 4 unique filaments Swap Instructions: Start with Anycubic Black At layer #11 (1.04mm) swap to SM blue At layer #17 (1.52mm) swap to Elego Cian At layer #20 (1.76mm) swap to Anycubic White for the rest. Nota: para su perfecta alineación con otras imágenes en modo panal descargar la guía https://makerworld.com/es/models/1361112-honeycomb-mode-guide-for-hueforge#profileId-1405828