Hueforge - Santa Claus Winking

Hello! Thanks for checking out my Hueforge! Please consider leaving a Like and Share. Hueforge - Santa Claus Winking Sketch Boost MeBoosts are always appreciated :) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180.06x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Gray At layer #20 (1.68mm) swap to Jade White for the rest.