Hueforge Skull Man

Hueforge of a skull man with fire and paint drops. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x120mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA 123Inkt Black, Transmission Distance: 0.3 PLA 3dJake Blue. Transmission Distance: 2 PLA R3D White, Transmission Distance: 7 PLA 123Inkt Red Transmission Distance: 3 PLA 123Inkt Yellow, Transmission Distance: 3 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #10 (0.88mm) swap to White At layer #13 (1.12mm) swap to Red At layer #19 (1.6mm) swap to Yellow (if your printer has 4 colors swap blue to yellow) At layer #20 (1.68mm) swap to White for the rest.