Hueforge Slipknot

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.1mm This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to RedAt layer #18 (1.52mm) swap to White for the rest. Frame : https://makerworld.com/es/models/823744#profileId-767187