HUEFORGE SOLUS_1

Disclaimer: The original image is not my work, I liked the image and used PS to modify its greyscale to fit hueforge prints.最后一张图是效果最好的版本，可惜工程文件被我遗失了Project: solus_2.hfpPrint at 100% infill with a layer height of 0.06mm with a base layer of 0.16mmThe Model is 230x275.96mm in sizeYou may print at higher layer heights below the Min Depth of 0.46mmThe Max Depth is 2.3mm and the Actual Depth is 2.3mmFilaments Used:PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Yellow Transmission